Three Canon LP-E6NH 2400 mAh batteries with a triple-slot charger that doubles as a carrying case. Fully decoded chip — the camera reads the battery as genuine and shows the remaining capacity.
Three Canon LP-E6NH 2400 mAh batteries with a triple-slot charger that doubles as a carrying case. Fully decoded chip — the camera reads the battery as genuine and shows the remaining capacity.
For Canon EOS R5, R6, R, 5D Mark IV, 5D Mark III, 6D Mark II, 7D Mark II, 90D, 80D, 70D, 60D and 30+ further bodies using LP-E6 / LP-E6N / LP-E6NH.

Three full-size 2400 mAh batteries work out at roughly 960 shots each — about 2,880 for the whole set — or two hours of continuous shooting per battery. In video one battery lasts around an hour and nine minutes, measured on an EOS R5 Mark II in 4K/25P.

The triple-slot charger draws power over USB-C, so a power bank or a car charger will do. With a 20 W PD adapter all three batteries are full in about five and a half hours; a 10 W source takes two hours longer. A single battery is done in roughly two and a half hours.

The state is obvious at a glance: a white LED means powered on, breathing red charging below 80 %, breathing blue charging above 80 % and steady green fully charged. The housing is made of fire-resistant material and watches temperature, over-voltage, over-discharge, over-current, over-charge and short circuit; once full it switches to trickle charging, which is gentler on the cells.

| Manufacturer: | K&F Concept |
| Category: | 7.2V battery |
| Battery type | Canon LP-E6NH |
| Capacity | 2400mAh |
| Batteries included | 3ks |
| Charger included | Yes |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking