K&F Concept 3× LP-E6NH 2250 mAh Battery Set with 3-Slot LCD Charger

Three K&F Concept batteries compatible with Canon LP-E6NH (2250 mAh, 7.4 V, 16.6 Wh) and a charger that charges all of them at once. The charger runs off USB-C or Micro USB from an adapter, a power bank, a laptop or in the car, and its LCD display shows the status of each battery. For the EOS R5, R6, R6 Mark II, R7, R and the 5D, 6D, 7D and 90D DSLRs.

The batteries replace original Canon LP-E6, LP-E6N and LP-E6NH packs. The camera recognises them without warning messages and shows the remaining capacity. Compatible: Canon EOS R, R5, R6, R6 Mark II, R7, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 6D, 6D Mark II, 7D, 7D Mark II, 60D, 60Da, 70D, 80D, 90D, XC10, XC15. The EOS R5 Mark II and R6 Mark III are designed for LP-E6P batteries; LP-E6NH packs work in them with restrictions – no Wi-Fi or Ethernet, no accessories powered from the shoe, no pre-shooting or HDMI RAW output, and fewer shots. LP-E6 type batteries are also used by the Blackmagic Pocket Cinema Camera 4K and 6K, Micro Studio Camera 4K and Micro Cinema Camera; the Canon EOS C50 takes LP-E6NH as an option, with restrictions.

Three 2250 mAh batteries

Each battery holds 2250 mAh at 7.4 V (16.6 Wh) and lasts for about 3 hours of video or 2000 shots. With three of them you can shoot all day without looking for a socket.

3-slot charger with LCD

The charger delivers 8.4 V at 850 mA with one battery (about 2.6 h), 550 mA with two (about 4 h) and 350 mA with three (about 6.5 h). The display shows the status of each slot. It takes 5 V / 2.4 A over USB-C or Micro USB – never through both ports at the same time.

Safety

Batteries and charger are protected against overvoltage, overcurrent, short circuit, overheating and overcharging and carry the CE, FCC and RoHS marks. The batteries charge at 0 to 45 °C and operate from −10 to 60 °C.