Accsoon CineView HE TX is a standalone wireless HDMI transmitter for a camera rig and an existing CineView HE monitoring system. It sends Full HD up to 60p and PCM audio simultaneously over 2.4 and 5 GHz, with latency below 60 ms excluding camera latency and range up to 350 m in unobstructed, interference-free line of sight. Full-size HDMI input and local…
Accsoon CineView HE TX is a standalone wireless HDMI transmitter for a camera rig and an existing CineView HE monitoring system. It sends Full HD up to 60p and PCM audio simultaneously over 2.4 and 5 GHz, with latency below 60 ms excluding camera latency and range up to 350 m in unobstructed, interference-free line of sight. Full-size HDMI input and local loop-out connect the camera and an on-camera monitor. One TX supports up to four hardware receivers or Accsoon SEE mobile devices in total. A compatible receiver is required for a remote HDMI monitor or computer UVC workflow and is purchased separately. Power options are NP-F batteries, 7.4–16.8 V DC or 5 V USB-C; batteries, cables and monitors are not included.
ACCSOON CINEVIEW HE · TX
Camera HDMI for your crew
This standalone transmitter sends one camera’s Full HD video to compatible receivers or Accsoon SEE mobile devices. HDMI loop-out retains your wired on-camera monitor. A hardware receiver is purchased separately.
Full HD 60p2.4 + 5 GHzHDMI IN/OUT
Monitor away from the camera
Mount this TX on the camera rig and connect the camera’s HDMI output. A separately purchased compatible RX feeds a remote HDMI monitor; a phone or tablet can receive directly in Accsoon SEE. The exact HE manufacturer photograph illustrates the complete camera/monitor workflow, rather than the contents of this transmitter-only package.
Two bands for one picture
CineView HE transmits the picture simultaneously over 2.4 and 5 GHz. The receiver compares both data streams and combines them into the output picture, helping reduce the impact of interference. Diagram: 1 and 2 show losses on each band, 3 their combination in RX and 4 the recovered picture. Performance still depends on the surrounding radio environment.
Range up to 350 metres
The manufacturer specifies a range up to 350 m with line of sight, no obstructions and no interference. Wireless transmission latency is below 60 ms and excludes camera latency. This combination supports on-set monitoring; reception distance on a phone can differ from that of a hardware receiver.
HDMI at the camera, HDMI and UVC at RX
This TX provides full-size HDMI input and local HDMI loop-out for an on-camera monitor. The wired loop-out does not add wireless transmission latency. The right-hand RX in the diagram is purchased separately: its HDMI and USB-C UVC outputs are not ports on this transmitter. HE carries Full HD up to 60p and PCM audio; it does not accept 4K or SDI.
Up to four receiving devices
One TX supports a maximum of four wireless receiving devices in total. Combine separately purchased compatible hardware RX units with phones or tablets running Accsoon SEE for iOS and Android: for example 1 RX + 3 mobile devices, or 4 RX. A phone receives directly from TX; a wired monitor after RX consumes no extra wireless slot. This package contains only one transmitter.
Video to a computer without a capture card
1 · UVC: a separately purchased HE receiver connects to a computer using a USB-C data cable, allowing software such as OBS to use the picture without an extra capture card. This TX has no UVC data output. 2 · RTMP: Accsoon SEE on a phone or tablet uses that mobile device’s Internet connection. TX does not stream directly to the Internet; platform support depends on the app and the destination’s current terms.
Accsoon SEE monitoring tools
Mobile reception adds exposure, colour, framing and focus tools, recording and live streaming in Accsoon SEE. The numbered legend follows the manufacturer’s icons. The interface screenshot illustrates the app; CineView HE transmission remains Full HD.
Monochrome preview
Histogram
LUT
Mirror
Zebra
False colour
Overlay
Waveform
Vectorscope
Audio
Markers
Focus
RGB
Screenshots
Grids
Display correction
Power to suit your rig
Power this transmitter from an NP-F550/750/970 battery, 7.4–16.8 V DC or a 5 V USB-C source rated at least 2 A. The DC connector is 5.5 × 2.1 mm, centre positive. TX’s USB-C is a power input; the UVC data port shown on RX belongs to a separately purchased receiver. Batteries, supplies and power cables are not included. USB-C does not charge an NP-F battery.
At startup, TX automatically selects a transmission channel. Pair units with the 0–F group dial; HQ, NOM and SPD modes let you prioritise picture quality or speed. The fanless aluminium body adds no fan noise on set. Each unit has a 1.3″ OLED, a manufacturer-specified weight of 200 g and a 1/4″-20 mounting thread. Before connecting other models, verify exact compatibility and firmware; HE/SE does not mean universal compatibility with every Accsoon device.
PACKAGE CONTENT
Accsoon CineView HE TX transmitter ×1
Antennas for the transmitter
Cold shoe mount adapter ×1
User manual ×1
SPECIFICATIONS
Bands: 2.4 GHz + 5 GHz
Maximum resolution: 1920 × 1080, 60p
Range: Up to 350 m; line of sight, no obstructions or interference
Latency: <60 ms; excludes camera latency
Receiving devices: Maximum 4 in total per TX
Audio: PCM, 44.1/48 kHz, 16/24 bit
Unit display: OLED 1.3″
Battery: NP-F550 / NP-F750 / NP-F970
DC power: 7.4–16.8 V
DC connector: 5.5 × 2.1 mm, female, centre positive
USB-C power: 5 V; source rated at least 2 A
Dimensions per unit: 105 × 66 × 32 mm, excluding antennas
The Accsoon Cineview HE TX is a professional wireless video transmitter with an HDMI input and USB-C UVC output, offering exceptional transmission stability and the option to be powered via NP-F batteries or a DC input. For optimal performance, we recommend pairing the transmitter with high-quality power systems, mounting adapters for rigs, and accessories for monitoring on mobile devices.
Power and Batteries - Accessories for reliable power supply to the transmitter using the NP-F standard.
CZ
SK
HU
AT
DE
ES
SI
HR
