Accsoon CineView Master 4K RX. A standalone receiver for a Master 4K system, with HDMI UHD and SDI Full HD outputs. Transmitter purchased separately. The system uses RTMS 4.0 and simultaneous 2.4/5/6 GHz transmission for a director, focus puller or remote monitoring station. It supports UHD 3840 × 2160 up to 60p, H.264/H.265, four wireless viewing devices…
Accsoon CineView Master 4K RX. A standalone receiver for a Master 4K system, with HDMI UHD and SDI Full HD outputs. Transmitter purchased separately. The system uses RTMS 4.0 and simultaneous 2.4/5/6 GHz transmission for a director, focus puller or remote monitoring station. It supports UHD 3840 × 2160 up to 60p, H.264/H.265, four wireless viewing devices per TX plus one wired iPhone/iPad, and latency below 25 ms at 1080p60 or below 35 ms at 4K60 in low-bitrate mode excluding the camera. Each unit has six antennas, a 1.05″ colour LCD, an aluminium housing and NP-F or 7.4–16.8 V DC power. The manufacturer’s 2.5 km measurement applies to 1080p60 low-bitrate mode under FCC conditions with clear line of sight and no interference; actual permitted operation and range depend on location. Batteries, power supplies and monitors are purchased separately.
ACCSOON CINEVIEW MASTER 4K · RX
A standalone receiver for a Master 4K system, with HDMI UHD and SDI Full HD outputs. Transmitter purchased separately.

The manufacturer photograph shows Master 4K on set. UHD up to 60p helps the director or focus puller assess detail without running a video cable across the set. Cameras, monitors and batteries shown are separate equipment.
RTMS 4.0 coordinates transmission across 2.4, 5 and 6 GHz with DFS. The 8K-capable processor manages simultaneous streams; actual video remains UHD 4K60. Attach the six antennas correctly: four long 2.4/5 GHz antennas and two short 6 GHz antennas per unit.
The diagram shows TX input, wireless RX, TX HDMI loop output and USB-C video to iOS. One TX feeds four wireless viewing devices in total, mixing compatible receivers and mobiles, plus one wired iPhone/iPad. Each RX uses one wireless slot. RX HDMI outputs UHD up to 60p; SDI remains Full HD up to 60p. Mobile recording and Internet streaming run in Accsoon SEE. Match TX/RX group numbers. Extra devices shown are purchased separately. Only RX is included in this package; TX and mobile devices in the diagram illustrate the wider system.
Above: TX with 3G-SDI input up to 1080p60, HDMI input/loop-out up to UHD 4K60, USB-C video to iPhone/iPad and DC input. Below: RX with 3G-SDI output up to 1080p60, HDMI output up to UHD 4K60 and DC input. RX has no USB video output. SDI input supports A/B; RX output uses A. HDMI loop-out follows the HDMI input format.
The 4K stream serves wireless and wired iOS monitoring. This photograph shows Master 4K RX feeding a monitor via HDMI.
The aluminium unit has an active fan with Standard, Quiet and Off modes. Standard adjusts speed with temperature; Quiet limits its maximum speed. The 1.05″ colour LCD and rotary control show and adjust connection, format, channel and group settings. The anti-rotation 1/4″ mount secures the unit to a suitable rig. Body dimensions are 130 × 95 × 32 mm excluding antennas.
Power RX with NP-F550/750/970 or 7.4–16.8 V DC, 5.5 × 2.1 mm centre positive, using a source rated at least 2 A. Typical consumption is 5 W. For NP-F/DC hot swapping keep the alternate source connected. RX weighs 320 g without antennas. Master 4K TX, batteries, power supplies and signal cables are separate equipment.
The Accsoon CineView Master 4K Receiver is a professional wireless video receiver with 4K resolution support that uses standard NP-F batteries for power and offers a wide range of mounting options. For optimal use in a production environment, it is essential to pair it with high-quality chargers, mounting adapters for monitors, and protective carrying cases.
Power and Batteries - Accessories to ensure continuous operation of the receiver using NP-F batteries.
Mounting and Attachment - Components for securely attaching the receiver to monitors, gimbals, or camera rigs.
Monitors and cages - Protective cages and mounts for tablets that can be used as viewfinders in conjunction with a receiver.
Cabling and Connectivity - Connection cables for transmitting video signals from the receiver to the display device.
Protection and Transport - Durable cases for safe transport of the wireless system and its accessories.
Rigs and Support - Additional components for building complex camera setups.
| Manufacturer: | Accsoon |
| Category: | Wireless video transmission |
| Line-of-sight range | 2500m |
| Unit dimensions without antennas | 130x95x32mm |
| Weight per unit | 320g |
| Receivers in package | 1 |
| Maximum transmission resolution | 3840x2160px |
| Maximum frame rate | 60fps |
| DC input voltage range | 7.4x16.8V |
| Operating temperature | -10x40°C |
| Typical receiver power consumption | 5W |
| Frequency band | 2.4 GHz · 5 GHz · 6 GHz |
| Power supply | DC · NP-F550 · NP-F750 · NP-F970 |
| Material | Aluminium alloy |
| Colour | Grey |
| Mounting interface | 1/4″-20 |
| Functions | Active cooling: Standard / Quiet / Off · Battery hot swap with DC connected |
| DC power connector | 5.5 × 2.1 mm socket, centre positive |
| Audio sampling frequency | 48 kHz |
| Audio bit depth | 16-bit · 20 bit · 24-bit |
| Output connector | BNC – female · HDMI type A – female |
| 3G-SDI output level | A |
| Status Display Type | Colour LCD |
| Compatible Wireless System | CineView M7 Pro · CineView Master 4K |
| Video codec | H.264 / H.265 |
| Number of antennas per unit | 6 |
| Colour LCD diagonal | 1.05″ |
| Receiver weight without antennas | 320g |
| Minimum DC source current | 2A |
| Transmission protocol | RTMS 4.0 |
| Latency | <25 ms (1080p60) / <35 ms (4K60) |
| Input | Wireless video reception |
| Output | 3G-SDI · HDMI |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking