This kit pairs the Tilta charging station for NP-FZ100 batteries with four Tilta NP-FZ100 batteries rated at 2400 mAh. The station has four charging bays, draws up to 45 W over USB-C and fills four batteries in about three hours. Every battery has its own USB-C input and a decoding chip, so the camera reports the true charge level.
This kit pairs the Tilta charging station for NP-FZ100 batteries with four Tilta NP-FZ100 batteries rated at 2400 mAh. The station has four charging bays, draws up to 45 W over USB-C and fills four batteries in about three hours. Every battery has its own USB-C input and a decoding chip, so the camera reports the true charge level.
Almost everyone carries a single-slot charger — and then spends the evening swapping four batteries through it. This station fills all four charging bays at once and still fits into a pocket of the bag.
The station has four charging bays and fills them simultaneously. It draws up to 45 W over USB-C, so four NP-FZ100 batteries are full in about three hours — 68 % faster than a single-slot charger, according to the manufacturer. The station has no internal battery; it needs an adapter or a power bank to charge.
The charging bays are marked 01 to 04 and each has its own charge indicator. One glance shows which battery is done and which is still filling, so there is no need to try them one by one before leaving.
The clear lid holds the batteries in place and protects the contacts while the station rides in the bag. It opens in one motion and the batteries lift out from the top without unplugging the station from the power source.
The station charges original Sony NP-FZ100 batteries, Tilta batteries and most third-party NP-FZ100 batteries. There is no need to keep track of whose battery is which.
The PC and ABS housing measures 121.5 × 57 × 76 mm and weighs 176 g. It is an EDC format: the station takes up about as much room in the bag as a flat box and needs no separate case.
The kit contains four Tilta NP-FZ100 batteries rated at 2400 mAh. Each has its own USB-C input, so it can be topped up without the station. A decoding chip reports the true charge level to the camera and no unapproved-battery warning appears. Measured to CIPA, one battery lasts 600 stills or over two hours of video.
According to Sony, the NP-FZ100 battery is used by these bodies: α7 III, α7 IV, α7 V, α7R III, α7R IIIA, α7R IV, α7R IVA, α7R V, α7S III, α9 II, α9 III, α1, α1 II, α6600, α6700, α7C, α7C II, α7CR, FX3, FX30, ZV-E1, ZV-E10 II. The list comes from the camera manufacturer, not from Tilta.
| Manufacturer: | Tilta |
| Category: | 7.2V battery |
| Battery type | Sony NP-FZ100 |
| Capacity | 2400mAh |
| Batteries included | 4ks |
| Charger included | Yes |
| Charging slots | 4ks |
| USB-C charging | Yes |
| Mount type | NP-FZ100 |
| Charger battery type | Sony NP-FZ100 |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking