Tilta Khronos iPhone 15 Pro Lightweight Kit - Space Gray

The Khronos Lightweight Kit is an aluminium cage for the iPhone 15 Pro with two adjustable handles. The case is fastened to the phone with four screws and accessories snap into locking clamps with electrical contacts, so power runs through the whole cage. The kit is machined for the iPhone 15 Pro — it does not fit the iPhone 15 Pro Max.

A filmmaking cage around the phone

The aluminium cage wraps around the iPhone 15 Pro and holds it with four screws. Two adjustable handles snap into the locking clamps on either side, so you hold the phone with both hands like a camera, in landscape and in portrait. The silicone grip does not slip, handle height adjusts over a 53 mm range and the handle rotates from +90° to −90° in five positions.

Machined for the iPhone 15 Pro

The case is made for one model only. Its outer dimensions are 156.6 × 80.6 × 14 mm and the case alone weighs 69.5 g. The cut-outs line up with the buttons, the camera module and the USB-C port, which stays accessible. It does not fit the iPhone 15 Pro Max or older iPhones — Tilta makes a separate case for the iPhone 15 Pro Max (TK-IP15-PMFC-SG).

Locking clamp and pass-through power

Accessories are not screwed on: press the release button, slide the pins into the clamp and let go. The cage has several mounting points around its edge, so a handle, a light or a hub moves in seconds. The clamps carry electrical contacts — once you plug a Focus PD handle (sold separately) into the cage, it powers the LED panel or the cooling module through it.

What is in the kit

The box holds the case for the iPhone 15 Pro and two adjustable handles, one for each side. Rotated by 90° a handle also works as a top handle, and it has a 1/4″-20 thread at both ends for further accessories.

Four equipment levels

Khronos for the iPhone 15 Pro comes in four kits. The case is the same in all of them; only what is packed with it differs.

• Lightweight Kit — case and two adjustable handles (TK-IP15-PA-SG, TK-IP15-PA-TW)
• Basic Kit — case, LED panel and Focus PD handle with battery (TK-IP15-PB-SG, TK-IP15-PB-TW)
• Advanced Kit — case, cooling module, Focus PD handle, filter tray and two ND filters (TK-IP15-PC-SG, TK-IP15-PC-TW)
• Ultimate Kit — everything in the Advanced Kit plus the LED panel, USB-C hub, 38 mm Arca-Swiss adapter, wooden handle, SSD holder and the Black Mist 1/4 and White Mist 1/4 filters (TK-IP15-PD-SG)

This page is the Lightweight Kit for the iPhone 15 Pro in Space Gray.

Mounting interfaces

The adjustable handle has a 1/4″-20 thread at the top and at the bottom. A cold shoe, a NATO rail or a 38 mm Arca-Swiss adapter snap into the cage clamps the same way the handle does; Tilta sells them separately. The Arca-Swiss adapter fits tripod heads with an Arca clamp as well as the DJI RS 2, RS 3 and RS 3 Pro gimbals.