Saramonic SR-USB-C02 Locking 3.5mm TRS to USB-C Timecode Cable

The Saramonic SR-USB-C02 is a timecode cable from a locking 3.5 mm TRS connector to a right-angle USB-C connector. It carries timecode from the Saramonic TC-NEO or another generator or slate to the Saramonic K9 TX transmitter, so the recording runs on the same timeline as the other cameras and recorders on set. The cable is 36.5 cm long fully extended and weighs 20 g.

Saramonic SR-USB-C02

Timecode from the Saramonic TC-NEO generator into the Saramonic K9 TX transmitter via USB-C.

locking 3.5 mm TRSright-angle USB-C36.5 cm

Locking 3.5 mm TRS connector

Once inserted, the right-angle 3.5 mm TRS connector is secured by a rotating locking collar, so it will not pull out even when the camera moves. It plugs into the timecode port of the Saramonic TC-NEO and of generators and slates from other makers.

Right-angle USB-C connector

The right-angle USB-C connector plugs into the Saramonic K9 TX transmitter, which receives timecode through it. This cable is not meant for DJI action cameras; they need the SR-USB-C03 cable.

Jam sync from the generator

Plug the 3.5 mm TRS connector into the generator's timecode output and the USB-C connector into the timecode input of the Saramonic K9 TX transmitter. The device takes over the generator's timecode, and footage from all cameras and recorders lines up on a shared timeline in the edit.

Compatible devices

• Saramonic K9 TX transmitter

Additional information

The SR-USB-C02 cable carries timecode from the generator to the K9 TX transmitter, so the whole production runs on one timeline. The locking 3.5 mm connector stays put even when moving around the set, and the connectors and jacket stand up to daily use.