Saramonic SR-TRS-C08 Locking 3.5mm TRS to Right-Angle 9-Pin LEMO Male Timecode Cable

The Saramonic SR-TRS-C08 is a timecode cable from a locking 3.5 mm TRS connector to a right-angle 9-pin LEMO connector. It carries timecode from the Saramonic TC-NEO or another generator or slate to a RED Komodo 6K or RED V-Raptor camera, so the recording runs on the same timeline as the other cameras and recorders on set. The cable is 33.5 cm long fully extended and weighs 41 g.

Saramonic SR-TRS-C08

Timecode from the Saramonic TC-NEO generator into RED Komodo 6K and V-Raptor cameras.

locking 3.5 mm TRS9-pin LEMO, right-angle33.5 cm

Locking 3.5 mm TRS connector

Once inserted, the right-angle 3.5 mm TRS connector is secured by a rotating locking collar, so it will not pull out even when the camera moves. It plugs into the timecode port of the Saramonic TC-NEO and of generators and slates from other makers.

Right-angle 9-pin LEMO connector

The right-angle nine-pin LEMO connector plugs into RED Komodo 6K and RED V-Raptor cameras and other devices with a 9-pin LEMO timecode input.

Jam sync from the generator

Plug the 3.5 mm TRS connector into the generator's timecode output and the LEMO connector into the timecode input of the RED camera. The device takes over the generator's timecode, and footage from all cameras and recorders lines up on a shared timeline in the edit.

Compatible devices

• RED Komodo 6K
• RED V-Raptor
• other devices with a 9-pin LEMO timecode input

Additional information

The SR-TRS-C08 cable carries timecode from the generator to the camera or recorder, so the whole production runs on one timeline. The locking 3.5 mm connector stays put even when moving around the set, and the connectors and jacket stand up to daily use.