Hollyland Wireless Tally System – 8 Lights Set

The Hollyland Wireless Tally System – 8 Lights is a complete wireless tally kit for eight cameras. It offers up to 800 m range, green PVW and red PGM indication, adaptive frequency hopping, up to 16 channels via RJ45 and broad switcher compatibility. The kit includes the tally station, eight lights with swappable batteries, a charging base and a hard-shell case.

The kit links the switcher with eight dual-colour tally lights and gives camera operators clear PVW preview and PGM programme status up to 800 m away. The station connects to the switcher with a tally cable via DB25 or RJ45 and sends camera status wirelessly in the 2.4 GHz band.

Wireless tally for eight cameras

Tally station, eight lights and a charging base in one case – ready to connect to the switcher.

up to 800 mup to 16 channels2.4 GHz LoRa> 8 h runtime

Lightweight tally light

The light weighs approx. 85 g, 98.5 g with battery, and runs for more than eight hours per charge. The Li-ion 700 battery swaps in seconds.

Tally station

Display and controls on the front, DB25 and RJ45 inputs, a pass-through port for the switcher and two TNC antennas on the rear.

Camera status at a glance

Green PVW marks the preview, red PGM the camera on air. Adaptive frequency hopping keeps the link stable even in a busy RF environment.

16 channels via RJ45

Up to 12 channels via DB25 and 16 via RJ45 – add lights as the project grows.

Battery shared with Solidcom

The Li-ion 700 battery also fits Hollyland Solidcom C1 and C1 Pro intercoms.

Setup: switcher → tally station → tally lights

The tally station connects to the switcher with a standard tally cable. The sequence learning function works out by itself which PGM and PVW button belongs to which camera, so the system works with switchers using both high and low voltage levels.

Tally station ports

The rear panel of the station has a DC power input, an RJ45 tally input with a Control LOOP OUT pass-through port for the switcher, a DB25 tally input, a reserved USB-C port and two TNC antenna connectors.

Up to 16 channels

The RJ45 input handles up to 16 channels of dual-colour tally, the DB25 input up to 12. Each tally light is assigned to its camera with the number dial, so the number of lights can easily grow or shrink with the project.