MOVMAX Double Socket Arm (10 cm)

The Movmax 10 cm double socket arm joins two parts with a 1″ ball in the Movmax telescopic rod system. A single knob in the middle releases both sockets, so you can aim a camera, phone or monitor and lock the position again.

The double socket arm is the articulated link of the Movmax telescopic rod system for filming in a car. It has a socket for a 1″ ball at each end, so it joins, for example, the rod clamp to a connector for a camera, phone or monitor. The same arm is included in the rod kits for action cameras, phones and 1/4″ thread.

The joint between rod and camera

A 10 cm arm with a socket for a 1″ ball at both ends and a single locking knob.

10 cm length2× 1″ socketSingle locking knobMovmax 1+N system

Loosen, aim, tighten

Loosen the knob in the middle of the arm to release both sockets and turn the attached device to the angle you need. Tighten the knob to lock the position.

The link of the whole rig

The arm joins Movmax parts with a 1″ ball – the rod clamp, the 1/4″ thread connector, the NATO clamp, the action camera adapter or a phone holder.

The exact angle inside the car

The rod sets the height, the arm sets the direction. With joints at both ends, you can aim the camera at the driver, the passenger or the road ahead.

10 cm length

A compact arm for a tidy rig in the cabin.

1″ sockets at both ends

Takes Movmax parts with a 1″ ball.

Single knob

One control releases and locks both joints.

Part of the rod kits

The same arm comes in the Movmax telescopic rod kits.