Tilta NP-W126S Battery with USB-C Input (1050mAh) - Ash Green

The Tilta NP-W126S replacement battery charges straight from a cable through its own USB-C input — no charger and no dock required. The cell delivers 1050 mAh, that is 7.77 Wh at a nominal voltage of 7.4 V, and a full charge takes about 2 hours 40 minutes. Its dimensions match the original, so it fits the camera without any adapter. Ash Green finish.

The Tilta NP-W126S is a replacement battery for Fujifilm cameras that take the original NP-W126S cell. Its size and shape match the original, so it drops into the battery compartment without play and without adapters. The difference is the USB-C input on the battery itself: it charges from an ordinary cable off a power bank, a laptop or a mains adapter, so there is no charger to pack. The input handles 5 V / 1 A (5 W) and a full charge takes roughly 2 hours 40 minutes.

Inside sits a decoding chip that passes battery data to the body. The camera therefore shows the state of charge as a percentage exactly as with the original and raises no unrecognised-battery message.

The housing is PC + ABS and the battery carries multi-stage protection — against overcharge, deep discharge, short circuit, overcurrent, overheating and magnetic fields. The CCC, FCC, CE, UL, RoHS certifications cover safety requirements for the European and overseas markets. Charge at 0 to 45 °C, discharge at −10 to 60 °C and store at −20 to 45 °C.

According to the camera manufacturer, the NP-W126S cell is intended for X100VI, X100V, X100F, X half, X-T50, X-T30 II, X-T30 III, X-T20, X-T10, X-T2, X-T1, X-T100, X-T200, X-S10, X-Pro2, X-Pro3, X-H1, X-E3, X-E4, X-E5, X-M5, X-A2, X-A3, X-A5, X-A7. Check the cell type for your particular body in its manual; the list changes with new models.