Tilta LP-E17 Battery with USB-C Input (950mAh) - Forest Green

The Tilta LP-E17 replacement battery charges straight from a cable through its own USB-C input — no charger and no dock required. The cell delivers 950 mAh, that is 7.03 Wh at a nominal voltage of 7.4 V, and a full charge takes about 2 hours 15 minutes. Its dimensions match the original, so it fits the camera without any adapter. Forest Green finish.

The Tilta LP-E17 is a replacement battery for Canon cameras that take the original LP-E17 cell. Its size and shape match the original, so it drops into the battery compartment without play and without adapters. The difference is the USB-C input on the battery itself: it charges from an ordinary cable off a power bank, a laptop or a mains adapter, so there is no charger to pack. The input handles 5 V / 1 A (5 W) and a full charge takes roughly 2 hours 15 minutes.

The battery matches the original mechanically and behaves in the body like an ordinary LP-E17 cell. Tilta does not list a decoding chip for a percentage state-of-charge read-out on this type, so go by what the camera itself displays.

The housing is PC + ABS and the battery carries multi-stage protection — against overcharge, deep discharge, short circuit, overcurrent, overheating and magnetic fields. The CCC, FCC, CE, UL, RoHS certifications cover safety requirements for the European and overseas markets. Charge at 0 to 45 °C, discharge at −10 to 60 °C and store at −20 to 45 °C.

According to the camera manufacturer, the LP-E17 cell is intended for EOS RP, EOS R8, EOS R10, EOS R50, EOS R50 V, EOS R100, EOS M3, EOS M5, EOS M6, EOS M6 Mark II, EOS 200D, EOS 250D, EOS 750D, EOS 760D, EOS 77D, EOS 800D, EOS 850D, PowerShot V1. Check the cell type for your particular body in its manual; the list changes with new models.