Tilta 2-Pin Lemo to 3-Pin Fischer Cable

The Tilta TCB-2LE-3FS-17 is a power cable with a 3-pin Fischer plug at one end and a 2-pin Lemo plug at the other. It plugs into a 3-pin Fischer power port on the rig or camera and carries power to an accessory with a 2-pin Lemo input — a monitor, a video transmitter or a focus motor. The accessory then runs off the camera's main battery, without a battery of its own.

The Tilta TCB-2LE-3FS-17 links a 3-pin Fischer power port with 2-pin Lemo accessories. The rig needs no second battery just for the add-ons — the power comes from the same source that feeds the camera, and the setup stays small.

3-pin Fischer on the rig, 2-pin Lemo on the accessory

The 3-pin Fischer plug goes into the power output on the camera, battery plate or cage power module, the 2-pin Lemo plug into the accessory's input. Both connectors hold with push-pull locking, so the cable will not pull out even when tugged. The cable does not change the voltage, it only passes it on: the accessory must be built for the voltage the 3-pin Fischer port supplies, so it is checked on both devices before plugging in.

Straight copper cable

The cable is straight, with copper conductors, a rubber jacket and aluminium-alloy connectors; on the cage it runs along the rods and a hook-and-loop strap gathers the spare length. The colour is black.

Siblings in the same series: TCB-3FS-4LE-17 (3-pin Fischer to 4-pin Lemo) for accessories with 4-pin Lemo, TCB-2LE-2LE-17 (2-pin to 2-pin) and TCB-2LE-4LE-17 (2-pin Lemo to 4-pin Lemo).

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.