K&F Concept Canon LP-E6P Battery 2520mAh, 2-Pack, USB-C Charging

The two K&F Concept LP-E6P batteries with 2520 mAh each have their own USB-C port, so you charge them with a cable from an adapter, a power bank, a laptop or a car charger, no separate charger needed; a full charge takes about 2.5 hours. An indicator on the battery shows the charging status. They suit Canon EOS R-series cameras and the DSLRs that take the LP-E6P battery.

The batteries have a 2520mAh capacity (7.2V, 18.15Wh) and a fully decoded chip — the camera treats them as OEM, shows the remaining capacity and doesn't warn about a third-party battery.

Two batteries for a full day

The pack contains two 2520 mAh batteries: while one is in the camera, the other charges or waits in your pocket as a spare.

Charge from a laptop

The USB-C port is right on the battery. All you need is the included cable and a USB source: an adapter, a power bank, a laptop or a car charger.

• 2× Canon LP-E6P battery, 2520mAh
• Charges directly via its own USB-C port, no external charger needed — also works with an original Canon charger or the camera's own USB-C port
• Full charge in 2.5 hours (input max. 5V/2A)
• LED indicator on the battery is red while charging and green when full
• Protection against overcharge, over-discharge, overvoltage, overcurrent, short circuit and overheating

For Canon EOS R6 Mark III/II, R5 Mark II, R5, R6, R6V, R7, R5C, R, 5D Mark IV/III/II, 6D Mark II, 7D Mark II, 5DS, 6D, 7D, 90D, 80D and other models using the LP-E6P battery. Some features may require a camera firmware update.