Tilta Camera Cage for Sony Alpha 7 V Pro Kit - Black

A complete cine kit for the Sony α7 V, α7 IV and α7R V: full cage, Tilta Xeno top and side handles, a height-adjustable Arca baseplate and two 15 mm rods. The baseplate holds the 85 mm LWS standard, so a follow focus and a matte box fit without shimming. The side handle adjusts over 40 mm of height and is covered in non-slip silicone.

The Pro Kit is the full cine build: full cage, Xeno top and side handles and a height-adjustable Arca baseplate with two 15 mm rods. It turns the camera into a rig that can carry a follow focus, a matte box and a lens support.

Key advantages

One cage, three bodies

The cage fits the Sony α7 V, α7 IV and α7R V. If you switch between two bodies, you only need one cage.

Adjustable slider

The mount can be fine-tuned along the body, so the cage sits firmly on every supported model.

Dual-direction Arca-Swiss plate

The bottom plate works both ways: on a gimbal or a tripod you simply slide it in and fine-tune the position.

Accessories attach via the cold shoe and 1/4″-20 threads with locating points; the full cage adds 3/8″-16 threads. A microphone, light, monitor or recorder therefore sits without twisting.

The cage follows the shape of the body and leaves the buttons, the battery compartment and the memory cards freely accessible. It does not get in the way of the OEM flash, the microphone handle or lens adapters — the camera still handles the way you are used to.

The cage has slots for a wrist strap and a shoulder strap, a magnetic key (Allen and flathead in one) is recessed into the bottom plate, and there is a 3/8″-16 thread with a fitted adapter to 1/4″-20.

Handles screw into the integrated 1/4″-20 threads for a two-handed grip — vertical shooting becomes noticeably steadier.

The included clamp holds an HDMI cable 6.5 to 12 mm in diameter. The optional USB-C cable clamp (TA-T100-CC-B) takes 5 to 8 mm and is intended for the Sony α7 V.

What is in the kit

The Tilta Xeno Top Handle connects to the top plate with a 1/4″-20 thread. There is plenty of finger clearance under the handle, and on top it has its own 1/4″-20 threads and a cold shoe for an external monitor or microphone.

The Tilta Arca height adjustable baseplate holds two 15 mm rods and lets you move the camera so that the 85 mm LWS standard is met between the rods and the centre of the sensor. A follow focus, matte box and lens support then fit without shimming.

The Tilta Xeno Side Handle mounts on the left side of the cage with a 1/4″-20 thread and its height adjusts over 40 mm. Non-slip silicone improves the grip, while a cold shoe and a 1/4″-20 thread with locating points carry further accessories.