Tilta Camera Cage for Sony Alpha 7 V Power Kit - Black

A power kit for the Sony α7 V, α7 IV and α7R V: the Tilta full cage, an extending ARCA receiver and the Mini PD battery plate for V-Mount batteries. Bring the battery closer or angle it as needed; a safety strap keeps it in place. Power comes out over USB-C PD 60 W, P-Tap and 2-pin LEMO (both 20 V / 3 A) — with no rods and no conventional baseplate.

The Power Kit solves power: it adds an extending ARCA receiver and the Tilta Mini PD battery plate for V-Mount batteries to the Full Camera Cage for the Sony Alpha 7 V. One large battery then runs the camera and the accessories — with no rods and no conventional baseplate.

Key advantages

One cage, three bodies

The cage fits the Sony α7 V, α7 IV and α7R V. If you switch between two bodies, you only need one cage.

Adjustable slider

The mount can be fine-tuned along the body, so the cage sits firmly on every supported model.

Dual-direction Arca-Swiss plate

The bottom plate works both ways: on a gimbal or a tripod you simply slide it in and fine-tune the position.

Accessories attach via the cold shoe and 1/4″-20 threads with locating points; the full cage adds 3/8″-16 threads. A microphone, light, monitor or recorder therefore sits without twisting.

The cage follows the shape of the body and leaves the buttons, the battery compartment and the memory cards freely accessible. It does not get in the way of the OEM flash, the microphone handle or lens adapters — the camera still handles the way you are used to.

The cage has slots for a wrist strap and a shoulder strap, a magnetic key (Allen and flathead in one) is recessed into the bottom plate, and there is a 3/8″-16 thread with a fitted adapter to 1/4″-20.

Handles screw into the integrated 1/4″-20 threads for a two-handed grip — vertical shooting becomes noticeably steadier.

The included clamp holds an HDMI cable 6.5 to 12 mm in diameter. The optional USB-C cable clamp (TA-T100-CC-B) takes 5 to 8 mm and is intended for the Sony α7 V.

What is in the kit

The adjustable ARCA receiver with the Tilta Mini PD V-Mount battery plate replaces the classic baseplate-and-rods setup. The receiver extends, so you bring the battery closer to the body or further away, and a hinge lets you angle it relative to the camera.

The battery plate extends the runtime of the camera and accessories from large V-Mount batteries and delivers power three ways: USB-C PD 60 W, P-Tap and 2-pin LEMO (both 20 V / 3 A). Recessed strap slots hold the included safety strap so the battery cannot come off by itself; on top there are 1/4″-20 and M4 threads for further adapters or arms.