Saramonic Air 02

The Saramonic Air 02 is a pocket-sized two-channel wireless microphone system for professional interviews, vlogs and content production. Its exclusive 9.7 mm lavalier microphone uses a 6 mm diaphragm—approximately 1.5 times larger than a conventional miniature capsule—to capture detailed bass and clear treble, while its front-facing pickup helps reduce plosives.

Saramonic Air 02

Two transmitters with lavalier microphones, a receiver with a colour display and a metal case with a see-through lid — a complete two-channel system that fits in a pocket.

11 g90 dB SNR48 kHz / 24-bit300 m range1.05" display

A 9.7 mm lavalier microphone

The dedicated lavalier microphone has a 6 mm diaphragm, about 1.5× larger than typical wireless mics. It captures detailed lows and clean highs, offers a 101 dB dynamic range, and its front pickup reduces plosives. It weighs 8 g and the cable is 1.2 m long.

A receiver with a colour display

The 1.05" colour display shows the key settings at a glance. Buttons adjust gain, noise cancellation level and output mode, and a 3.5 mm headphone jack lets you monitor the sound in real time. Playback works without unplugging the receiver.

An 11-gram transmitter

The transmitter measures 36 × 16 × 13.2 mm, has a fixed metal clip and, in grey, looks like a retro accessory from the nineties. The kit includes two magnets and furry windshields for shooting outdoors.

Phone, computer and camera

The receiver connects to a phone or computer with the supplied USB-C adapter and to a camera with a 3.5 mm TRS cable. An optional Lightning adapter and hot shoe adapter can be added. Dual output lets you record and stream at the same time.

Up to 48 hours of runtime

The transmitter runs up to 10 hours and the receiver up to 6.5 hours with the display on, and both can be charged while recording. The 1,300 mAh case recharges the transmitters and receiver more than 1.5 times, bringing total runtime of the kit up to 48 hours with the receiver display off, or 41 hours with it on.

Studio-quality recording

48 kHz / 24-bit recording across the full 20 Hz to 20 kHz range, a signal-to-noise ratio above 90 dB and a maximum sound pressure level of 120 dB. Quiet passages and louder moments are captured without distortion.

Limiter and backup track

A smart limiter smooths out sudden peaks before they distort. On top of that you can enable a −6 dB safety track recorded as a backup; using it requires separating the tracks in post-production.

Two noise cancellation levels

Light mode reduces steady noise such as wind or keyboard clicks. Strong mode lowers louder background sounds to keep the voice in front. Switch it on the receiver or in the app.

Tone tuned your way

The Vocal Boost, High Lift and Low Bump EQ presets shape the voice without post-production. A low-cut filter at 75 Hz or 150 Hz reduces rumble and low-end noise.

Not just voice: instruments and ambience

The large diaphragm of the lavalier mic responds faster to transients and handles a wider dynamic range. That makes it a good fit not only for interviews but also for recording instruments and ambient sounds of varying intensity. Its compact size lets you conceal it under clothing for interviews, short films and music production.

Paired and ready

The transmitters and receiver are pre-paired and connect by themselves once switched on. During recording the receiver and the phone can be charged at the same time, so a flat battery does not interrupt the shoot. The transmitter indicator light can be turned off in the receiver menu; connection status stays visible on its display.

On camera without the hiss

The receiver powers on with the camera and, with the optional hot shoe adapter, passes digital audio to selected Sony cameras. We recommend lowering the gain on the camera, otherwise it can amplify the microphone’s self-noise. Range is up to 300 m in open space.

Additional information

The condenser microphone records at 48 kHz / 24-bit, delivers a signal-to-noise ratio above 90 dB and handles up to 120 dB SPL without distortion. The receiver’s 1.05-inch colour display provides control over gain, noise-reduction strength and output mode, while a 3.5 mm headphone connector supports real-time monitoring.

A smart limiter guards against sudden peaks, a −6 dB safety track gives you headroom in post-production, and two noise cancellation levels adapt to different environments. The receiver connects in analogue through a 3.5 mm TRS cable or through the supplied USB-C adapter; a Lightning adapter is optional. The transmitter runs up to 10 hours and the charging case extends the total runtime of the kit to up to 48 hours (with the receiver display off).