Manfrotto Virtual reality kit w/ aluminum mini tripod and extension boom

Manfrotto MKPROVR is a compact aluminium support kit for small 360° cameras, combining a tabletop mini tripod with a two-section extension column. At 205 g it travels easily, offers a 21–29 cm working height and folds to 30 cm. The supplied adapter provides 1/4″ and 3/8″ screw attachment options, while the complete assembly supports up to 2 kg with the load balanced on a firm, level surface. Camera and optional head are not included.

MANFROTTO MKPROVR

Support for 360° cameras

A lightweight tabletop base and two-section column raise a small 360° camera without a bulky tripod. Fold the aluminium kit for convenient transport.

29 cm0.2 kg2 kg

Two attachment sizes

Join the column’s 3/8″ socket to the tripod’s 3/8″ screw. The supplied adapter changes the camera attachment from a 3/8″ screw to a 1/4″ screw.

Assembly: 3/8″ connections. Adapter: 3/8″ female socket and 1/4″ male camera screw.

Set the column height

Unlock the collar, pull out the upper section and lock the collar again. The two-section column provides a 21–29 cm working height.

1 Unlock · 2 Extend · 3 Lock

A compact base for VR capture

The narrow column supports a small 360° camera above the tabletop base. Choose a balanced position and keep the full mounted load within 2 kg.

Illustrated 360° camera is not included.

Small kit, adjustable height

The aluminium mini tripod and extension column form a portable support for VR photography and video. Adjust the working height from 21 to 29 cm; the folded 30 cm kit is easy to pack in a camera bag or coat pocket. The sturdy legs with sure-grip tips help support the kit on a suitable surface.

Match the camera attachment

The supplied adapter lets you use 1/4″ or 3/8″ screw attachments. Match the camera’s socket before fitting it. A camera, ball head or smartphone holder is not part of the kit; choose any additional support for the required interface and load.

Set up with a balanced load

The 2 kg limit applies to the complete mounted load, including any added head or holder. Follow the manual: use a firm surface with less than 5° inclination, avoid surfaces into which the feet can sink, and keep the load balanced. Remove mounted equipment before carrying the kit. A lower-rated accessory sets the lower limit for the assembly.