K&F Fujifilm NP-W126/S Camera Battery Set, 1300mAh 3-Pack with 3- Slot Storage Case

Three Fujifilm NP-W126S 1300 mAh batteries with a triple-slot charger that doubles as a carrying case. Fully decoded chip — the camera reads the battery as genuine and shows the remaining capacity.

• 3× 1300 mAh battery — roughly 3× 325 shots
• Triple-slot charger tops up all three batteries at once
• USB-C charging — three batteries in ≈3.5 h
• A three-colour LED at each slot shows the charging state
• Six protections: temperature, over-voltage, over-discharge, over-current, over-charge and short circuit

For Fujifilm X-T30 II, X-T30, X-T20, X-T10, X-T3, X-T2, X-T1, X-M5, X-M1, X100VI, X100V, X100F, X-A1, X-A2, X-A3, X-E1, X-E2, X-E3, X-H1, X-Pro1, X-Pro2, X-Pro3 and other bodies using NP-W126S.

Three full-size 1300 mAh batteries work out at roughly 325 shots each — about 975 for the whole set. In video one battery lasts around 53 min, measured on 3840 × 2160/24P.

The triple-slot charger draws power over USB-C, so a power bank, a laptop or a car charger will do. With a 20 W PD adapter all three in 3.5 h. From an ordinary 5 V source it takes 5 h.

The state is obvious at a glance: a white LED means powered on, breathing red charging below 80 %, breathing blue charging above 80 % and steady green fully charged. The housing is made of fire-resistant material and watches temperature, over-voltage, over-discharge, over-current, over-charge and short circuit.