K&F Concept Fujifilm NP-W126 1300mAh Battery, 2-Pack + 2-Slot Charger

Two Fujifilm NP-W126 1300 mAh batteries and a 2-slot charger that charges them all at once. It runs off Micro USB or USB-C, so a power bank, a laptop or the car will top them up. Fully decoded chip: the camera shows the remaining capacity and raises no third-party battery warning. For Fujifilm X-S10, X-A1, X-A3, X-A7, X-A10, X-E1, X-E2, X-E4, X-H1, X-T1, X-T2, X-T3, X-T20, X-T30, X-T30 II, X-T100, X100F, X100V, X-Pro1 and other models.

Two 1300 mAh batteries

The batteries have a capacity of 1300 mAh, that is 9.6 Wh at 7.4 V. In practice that is roughly 650 shots each, about 1300 for the whole set. In video one battery lasts around 2 h 30 min.

2-slot charger

The charger has 2 slots and is powered over Micro USB or USB-C (5 V / 2.1 A), so a power bank, a laptop or a car charger will do. A full charge takes 2.5 h. Red while charging, green when charged or when the slot is empty.

The chip watches over-charge, over-discharge, over-voltage, over-current, short circuit and overheating, and switches to trickle charging once full.