Tilta USB-C Power Cable (60cm)

The Tilta TCB-USBC-USBC-60 is a 60 cm USB-C → USB-C power cable. It powers accessories with a USB-C port from a USB-C source on the rig — a battery plate, handle or power bank — and is made for the Nucleus Nano II motors: 60 cm reaches from the plate or handle at the back of the cage to the motor on the rods in front of the camera.

The Tilta TCB-USBC-USBC-60 is the longer of Tilta's USB-C power cables. On the rig it links a USB-C source at the back of the cage to a Nucleus Nano II motor or other USB-C accessory at the front by the lens, where 30 cm does not reach.

USB-C at both ends, 60 cm in between

The cable has a USB-C plug at each end. One goes into the source — a Tilta battery plate with a USB-C output, a handle with a USB-C port or a power bank — the other into the accessory's power port. The 60 cm length is made for Nucleus Nano II motors: it reaches from the battery plate or handle at the back of the cage to the motor on the 15 mm rods in front of the camera, and with two motors on a zoom it can also chain a pair set further apart, where 30 cm is not enough. The jacket is black.

From the plate to the motor with one cable

The USB-C source is usually at the back of the cage — a battery plate or handle — and the motor at the front by the lens; 60 cm covers that run, and the cable can be routed along the rods and clipped into a clamp. For two motors side by side on one zoom the same cable comes in 30 cm (TCB-USBC-USBC-30).

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.