Tilta Tiltaing Left Side Advanced Power Handle with Run/Stop Type VI (F570 Battery) - Black

The Tilta TA-LRH6-57-B is a left-side Tiltaing Advanced Power Handle with a run/stop button and a mount via a NATO rail clamp. It takes a Sony F570 battery underneath and powers accessories from it through 8 V USB-C and 12 V DC outputs; the camera is not powered from the handle. The REC button starts and stops recording through an optional USB-C run/stop cable. Aluminium alloy and stainless steel, colour black.

The Tilta TA-LRH6-57-B gives the left hand a grip and the camera two things that otherwise hang on cables from elsewhere: accessory power from a Sony F570 battery and a REC button right under the thumb.

The F570 battery powers accessories

The bottom of the handle holds a Sony NP-F570 battery; two outputs run from it — 8 V over USB-C and 12 V over a DC connector. That covers a monitor, a focus motor or a wireless video link, so the external power source disappears from the cage. The camera is not powered from the handle — it is not built to power camera bodies and does not power the Canon EOS R5 C.

NATO rail (Type VI) mount

The Type VI mount is a clamp for a NATO rail: the handle slides onto the rail on the side of the cage and locks. It holds as firmly as if bolted on, yet comes off in seconds — and sits further from the camera body than the Type IV mount, leaving more room for the fingers. It fits Tiltaing half and full cages for RED KOMODO, Sony a7S III, Panasonic S5 and BGH1.

REC button and run/stop cable

The handle carries a run/stop button: through an optional run/stop cable with USB-C on the handle side (Tilta RS-USBC range) it starts and stops recording on cameras that support the function through their port. The cable is chosen by the camera port — LANC, RED, Sony Multi Terminal, Canon and others. The mount rotates in its base, so the handle sits under the hand even on a cage whose thread is somewhere other than where it would suit.

Tiltaing handles and plates

The Tiltaing range builds the rig around the cage from parts that fit together: side handles with a REC button powered by a Sony F570/F970 battery or USB-C PD, wooden and quick-release top handles, handle adapters to an ARRI rosette, 15 mm LWS baseplates with a Manfrotto or ARCA plate and battery plates with P-Tap and USB-C outputs. They share 1/4"-20 and 3/8"-16 threads with ARRI locating pins, NATO rails and ARRI rosettes. This part is one of them.