Skaarhoj Inline 10 Modular Controller with SDI I/O

Inline 10 with SDI I/O is a compact shading controller for Blackmagic Design cameras with SDI in and out for the camera control protocol, 6 4-way buttons and 4 knobs with OLED displays. UniSketch OS and PoE.

SKAARHOJ Inline 10 with SDI I/O is a version of the compact Inline 10 controller targeted at shading Blackmagic Design cameras. Its SDI input and output carry the Blackmagic Design camera control protocol, so the controller adjusts cameras right in the SDI signal. Six 4-way buttons and four backlit knobs each have their own OLED display, and the panel works standalone or as a module for other SKAARHOJ panels.

Camera shading over SDI

6 4-way buttons and 4 knobs with OLED displays for controlling Blackmagic Design cameras over SDI.

SDI in and out4 backlit knobs6 four-way buttonsUniSketch OSPoE powered

Camera control inside SDI

The controller works with the Blackmagic Design camera control protocol carried in the SDI signal. White balance, gain, shutter or iris are adjusted straight from the panel.

Knobs and buttons with displays

Four backlit knobs and six 4-way buttons each have their own OLED display showing the parameter name and value.

Standalone or as a module

Inline 10 works as a standalone controller or as a module connected to other SKAARHOJ panels to build your own custom setup.

Programmable UniSketch OS

The panel runs the SKAARHOJ UniSketch operating system, which users can program for their specific workflow. Besides Blackmagic Design cameras it works with a wide range of other devices.

Wide compatibility

AJA RovoCam, IO Industries Flare 4K, Blackmagic ATEM and CamCtrl, Ensemble NXT 950, TriCaster and vMix.

One cable

Power and data over Ethernet with PoE (IEEE 802.3af), with a DC input as an alternative.

Programming over USB

The Micro-USB port is used to program the panel, and the cable is included.

Compact body

The small panel fits on any desk in the control room or on set.