Saramonic 1x3.5mm TRRRS Male to 4x XLR Splitter for Blink500 T4

The Saramonic SR-C2026 is a splitter cable for the Saramonic Blink500 T4 wireless system. Its right-angle 3.5 mm TRRRS plug goes into the receiver's LINE OUT, and four male XLR connectors feed each of the four transmitters to a separate input on a mixer, recorder or camera with XLR inputs. Every speaker gets their own track and their own level setting.

Saramonic SR-C2026

Four separate XLR channels for a mixer, recorder or camera from a single output of the Blink500 T4 receiver.

3.5 mm TRRRS4× male XLRfor Blink500 T4

Right-angle TRRRS plug

The five-pole 3.5 mm TRRRS plug with a right-angle body goes into the LINE OUT of the Blink500 T4 RX receiver and stays out of the way on a belt or a camera. It is followed by a coiled section that stretches as needed.

Four male XLR connectors

The four male XLR connectors plug into the microphone inputs of a mixer, field recorder or camera. Each carries the signal of one transmitter, so the tracks can be edited separately in post-production.

Four tracks instead of one

Set the output mode switch on the Blink500 T4 RX receiver to four channels. The audio of the four transmitters then comes out separately, and the SR-C2026 cable distributes it to four XLR inputs.

A four-person conversation into a recorder

With the SR-C2026 cable, an interview, discussion or podcast with four people can be recorded straight into a multitrack recorder or mixer. Each voice has its level set on its own channel, and the tracks stay separate in post-production.

Additional information

The Saramonic SR-C2026 is a specialized audio splitter cable tailored for the Blink 500 T4 four-person wireless microphone system, converting a single right-angled 3.5mm TRRRS output into four independent male XLR connectors for discrete multi-channel recording—perfect for professional cameras, mixers, recorders, or audio interfaces requiring individual level control and post-production flexibility. Featuring gold-plated connectors for corrosion-resistant, high-fidelity signal transfer, a coiled 15.75-inch (40 cm) lead from the rugged split joint, and a total length of 23.6 inches (0.6 m), this lightweight 6.49 oz (184 g) cable ensures reliable, tangle-free connections in demanding production environments.

The cable is shielded and has gold-plated connectors; the shielding minimises signal interference.