MOVMAX Adjustable Telescopic Rod for Car Mounting (86–136 cm)

The MOVMAX telescopic rod for car mounting is an 86–136 cm carbon fibre rod of about 230 g with three suction cups and a CNC aluminium bracket. For action cameras with a 1/4″ thread, such as Insta360 X4/X5, GoPro HERO12/13 and DJI Pocket 3.

This MOVMAX kit mounts an 86–136 cm carbon fibre telescopic rod to the car body with a triangular suction cup setup. Extend the camera in front of the bonnet, beside the car or above the roof to film the drive from unusual angles; the suction cup holds 10 kg vertically and the kit is rated for speeds up to 80 km/h.

A camera outside the moving car

An 86–136 cm carbon fibre rod on three suction cups for action cameras with a 1/4″ thread.

86–136 cm rodCarbon, approx. 230 gThree suction cupsUp to 80 km/h1/4″ and 3/8″ threads

Triangular structure

The 11.4 cm main suction cup and two 7.6 cm mini suction cups form a rigid triangle that keeps the rod steady while driving.

Camera off the body

Extend the rod in front of the front wing, above the roof or by the rear doors to capture the wheels, the driver and the car in motion.

CNC aluminium bracket

The aluminium alloy bracket has 1/4″ and 3/8″ threads for lights, action cameras, magic arms or monitors.

Shots you cannot get from inside

The light carbon fibre rod moves the camera well away from the body while three suction cups keep it steady. The result is dynamic footage of the wheels, bodywork and driver, just like in car commercials.

86–136 cm length

Two adjustable sections with silicone knobs.

Suction capacity

10 kg vertical, 2.5 kg horizontal.

Electric suction cup

The main cup can be replaced by the electric 86-0098, sold separately.

Mini suction cups

Also usable on their own inside the car on a window or windscreen.

Telescopic rod for car mounting. An 86–136 cm carbon fibre rod with flexible angles, stable and secure, with the option to switch to a solar electric suction cup.

More reliable and lighter. Two adjustable sections with matte finish and silicone knobs, 86–136 cm long and about 230 g. The carbon fibre tube does not shake.

Safe and sturdy. A CNC aluminium alloy bracket with 1/4″ and 3/8″ threads and a triangular suction cup setup. The main cup can be replaced by the electric 86-0098, purchased separately.

Installation in four steps. Remove the silicone cap, pump until the red line disappears, adjust the position of the suction cup and mount the camera.

Strong suction. The suction cup holds 10 kg vertically and 2.5 kg horizontally and stays put for more than two hours at 15–25 °C. Drive at up to 80 km/h and check it every hour.

Any angle you want. Place the rod at the front wing, by the rear doors or above the roof.

Flexible angles. A camera on the roof captures the driver, one at the front catches the spinning wheels.

In-car use. The mini suction cup with its arm can be removed and used separately on a side window, sunroof or windscreen.

Material and weight. The 230 g carbon fibre rod balances light weight and strength, portability and stability.

Widely compatible. For action cameras with a 1/4″ thread, such as Insta360 X4/X5, GoPro HERO12/13 and DJI Pocket 3.

In the box. Three double socket arms, two rod clamps, two 1″ ball connectors with 1/4″ thread, two 7.6 cm mini suction cups, an 11.4 cm suction cup with connector, silicone cover, rod extender, 86–136 cm rod and bag.