Movmax Adjustable Telescopic Rod for Insta 360(1m/3.3ft)

The Movmax telescopic rod for Insta360 is a suction cup car body mount with a 40–100 cm carbon fibre rod weighing about 230 g. For Insta360 X4/X5, GoPro HERO12/13 and DJI Osmo 360; the Insta360 app can erase the rod from the shot.

This Movmax kit combines a 40–100 cm carbon fibre telescopic rod with an 11.4 cm suction cup and a 7.6 cm mini suction cup. Extend a 360° camera above the car and film the drive in third person – the rod then disappears from the shot in the Insta360 app.

Your car in third person

A 40–100 cm carbon fibre rod on suction cups for 360° and action cameras with a 1/4″ thread.

40–100 cm rodCarbon, approx. 230 g10 kg suction holdUp to 60 km/h1/4″ thread

Camera above the roof

The two-section carbon fibre rod with matte finish and silicone knobs extends the camera up to 100 cm. It is light, yet does not shake while driving.

The angle you have in mind

The jointed arm and rod clamp let you place the camera at an angle over the bonnet, beside the car or high above the rear.

An invisible mount

The rod sits exactly on the axis of the 360° camera, so the Insta360 app erases it and leaves a clean third-person view.

No gear visible in the shot

Ordinary suction mounts show up in 360° footage. The slim Movmax rod points straight at the camera, so Insta360 software removes it and the camera seems to follow the car on its own.

11.4 cm suction cup

Holds 10 kg vertically and 2.5 kg horizontally.

7.6 cm mini suction cup

Can be removed and used separately on a window, sunroof or windscreen.

Safe use

Up to 60 km/h; check the suction cup every hour.

Carry bag

The whole kit fits into a 100 × 24 cm bag.

Suction cup car mount with rod. A 40–100 cm carbon fibre telescopic rod on suction cups – traceless shots, stable and safe, with the option to switch to a solar electric suction cup.

More reliable and lighter. Two adjustable sections with matte finish and silicone knobs, 40–100 cm long and about 230 g. The carbon fibre tube does not shake.

Third-person perspective. With the rod on the camera axis, the Insta360 app erases it from the shot, while other mounts leave obvious traces.

Endless shooting angles. Place the rod at an angle over the bonnet, at the rear or above the roof.

Strong suction. The suction cup holds 10 kg vertically and 2.5 kg horizontally and stays put for more than two hours at 15–25 °C. Drive at up to 60 km/h and check the cup every hour.

In-car use. The mini suction cup with its arm can be removed and used separately on a side window, sunroof or windscreen.

Widely compatible. For panoramic and action cameras with a 1/4″ thread, such as Insta360 X4/X5, GoPro HERO12/13 and DJI Osmo 360.

In the box. Double socket arm, rod clamp, 7.6 cm mini suction cup, 11.4 cm suction cup with connector, silicone cover, 40–100 cm telescopic rod and carry bag.