Feelworld P133-PRO

P133 PRO is a high quality monitor that is versatile enough to be used for broadcast studio,live production or crew outdoor shooting. P133 PRO works with all SD/HD/3D-SDI and up to 4K HDMI@60Hz video formats and including XLR,DC IN power input and V-mount battery plate so you can use it with battery or plug it into DC power. A series of camera auxiliary functions can help photographer to compose on-site and save post production time. This monitor can be mounted on wall through a VESA stand in addition to a desktop stand.

13.3" director monitor at 1000 nits

Full HD 1920 × 1080, 800:1 contrast, 170° angles

The P133-PRO is not an on-camera monitor but a director monitor — it belongs on a desk, a cart or a stand where the director and the client can see it. That is why the box holds desktop stand feet, a V-mount plate for large batteries and a TALLY kit that shows which camera is live.

At 1000 cd/m² it is twice as bright as an ordinary director monitor, so the picture stays readable outdoors and in a bright gallery. The 170° viewing angles keep colour steady even when several people watch from the side.

HDMI 4K at 60 Hz and SDI

Input and output are both dual — 3G-SDI and HDMI — so the monitor drops into any chain and passes the signal on. Over HDMI it accepts 4K UHD 3840 × 2160 and 4096 × 2160 at 60 frames, so fast movement from the camera does not stutter.

There is also a DVI input on the back and a USB port for loading custom 3D LUTs and firmware.

Calman software calibration

Up to 32 custom 3D LUTs

The panel is calibrated with Calman software, and the manufacturer shows the colour gamut before and after calibration. That is exactly what separates a professional director monitor from a cheap one — you can trust the colour instead of guessing at it later in post.

Up to thirty-two custom 3D LUTs load over USB, so you see the target look while shooting. A USB flash drive is not included.