DZOFilm Vespid PL Mount Tool Kit

The DZOFilm Vespid PL Mount Tool Kit is a complete set for converting a compatible Pictor Zoom or Vespid Prime lens from EF to PL. It includes the PL bayonet, protective mount cap, shim set and Torx T6 screwdriver. The shims provide precise flange-distance adjustment, and the back focus must be checked after installation; the manufacturer recommends a maximum tightening torque of 0.4 N·m. This is not a universal camera-to-lens adapter, and the conversion does not change the lens format or optical coverage.

DZOFILM · interchangeable lens mount

PL mount for Pictor and Vespid

Convert a compatible Pictor Zoom or Vespid Prime lens from EF to PL without placing an adapter between the lens and camera. The kit changes only the lens mount; it does not alter the lens format, focal length or optical coverage.

Pictor ZoomVespid Prime

Everything needed for an accurate conversion

The exact DZO-ACC1MPL kit includes the PL bayonet, protective PL mount cap, shim set and screwdriver. The shims allow the flange position to be fine-tuned so the focus scale agrees with the measured subject distance after the mount change.

Check back focus

After installation, verify the focus scale against the actual distance and adjust shim thickness only when required.

Tighten with care

DZOFILM’s mount-changing guide specifies a Torx T6 screwdriver and recommends a maximum tightening torque of 0.4 N·m.

Lens-specific kit

This historical SKU is documented for compatible Pictor Zoom and Vespid Prime lenses. Do not treat it as a universal PL adapter.