Tilta HDMI and Run/Stop Cable Clamp Attachment for Sony a7 II/a7R II/a7S II - Tilta Gray

The Tilta TA-T17-CC5-G is a cable clamp for the Tiltaing cage on the Sony a7 II, a7R II and a7S II. It screws directly to the cage and holds both the HDMI cable and the run/stop cable at the camera body, so the connectors neither work loose nor get yanked out while shooting. Aluminium alloy and stainless steel, Tilta Gray finish.

The Tilta TA-T17-CC5-G is a part for the Tiltaing cage of the Sony a7/a9 series: one clamp that secures the two cables that loosen most often on a handheld camera — HDMI to a monitor or recorder and run/stop to the handle.

Clamp for the HDMI and run/stop cable

The clamp is designed for the Sony a7 II, a7R II and a7S II in the Tiltaing cage for the a7/a9 series. Two screws fix it directly to the cage next to the ports; the HDMI cable and the run/stop cable go between its jaws and the screw clamps them, so the pull on the cable is taken by the cage rather than by the connector in the body. The cables do not get yanked out when carrying the rig or working with a monitor or recorder, and the camera ports stay unstressed.

The Tilta cage system

A Tilta cage is only the start: every series has parts designed for the camera body — top handles, side handles with a REC button, HDMI and USB-C cable clamps, battery plates, 15 mm rod holders, lens adapters and ARCA or NATO interfaces. The parts share 1/4"-20 and 3/8"-16 threads with locating pins, NATO rails and cold shoes, so they combine across series. This part is one of them.