MOVMAX Slider Elite With Mitchell Mount (1.2m)

The MOVMAX Slider Elite 1.2 m is an aluminium camera slider with 119.9 cm of travel and a Mitchell mount. It carries 2 to 25 kg, silent pulleys keep audio clean and knobs set brake and damping. Stand adapters and a bag are included.

Slider Elite is a manual MOVMAX camera slider for anything from stills cameras to fully rigged cinema cameras up to 25 kg. This version offers 1.2 m (119.9 cm) of travel and a carriage with a Mitchell mount. Two 5/8″ adapters hold the rail on stands, and the included bag makes transport easy.

A silent slider for cinema cameras

An aluminium rail with 1.2 m of travel and a Mitchell mount carries 2 to 25 kg and glides smoothly without noise.

1.2 m travel2–25 kg payloadMitchell mountSilent pulleysBrake and damping

Pulleys you cannot hear

A new set of silent pulleys runs on a precisely machined rail. It does not disturb the audio when you record sound.

A bag on wheels

The slider fits into the included transport bag that you can pull with one hand. Get it to set without a helper.

Stands at both ends

Two adapters with 5/8″ receivers fit onto light stands or tripods, so you can set the rail height to suit the shot.

Smooth moves with a full rig

The rail and pulleys are machined so precisely that the carriage stays smooth even with a camera of up to 25 kg. With 1.2 m of travel you can handle a gentle push-in as well as a longer lateral move.

Mitchell mount

The carriage takes heads with a Mitchell flat base.

Brake and damping

The damping knob sets the glide resistance, the brake locks the carriage in place.

Swappable mounts

Standard adapters accept 150, 100, 65 and 75 mm bowls or a Mitchell mount.

5/8″ adapters

Two stand adapters support the rail at both ends.

Slider Elite. Silent, easy to transport, smooth and stable, with a payload of 2 to 25 kg.

Super silent. A newly upgraded set of silent pulleys does not affect the recording while shooting.

Portable storage. Comes with a track bag you can drag along with one hand.

Smooth and stable. The precisely machined rail and pulleys deliver delicate movement and a very stable image.

2 to 25 kg payload. The slider carries lightweight cameras as well as fully rigged cinema cameras.

Swappable mounts and stand adapters. The carriage accepts 150, 100, 65 and 75 mm bowls or a Mitchell mount. The adapters fix the rail to stands at both ends.

Five lengths. Slider Elite comes with 0.9 to 2.1 m of travel; this listing is the 1.2 m version.

Packing list. Slider Elite, a head mount (on this variant the Mitchell mount), two stand adapters and a transport bag.