Two Canon LP-E17 1040 mAh replacement batteries with a USB-C port built into the battery. A cable and a power bank, laptop or car charger are all you need, with no separate charger to carry. Fully decoded chip: the camera shows the remaining capacity and raises no third-party battery warning. For Canon EOS R50, R100, R10, R8, RP, M3, M5, M6 Mark II, 77D, 200D,…
Two Canon LP-E17 1040 mAh replacement batteries with a USB-C port built into the battery. A cable and a power bank, laptop or car charger are all you need, with no separate charger to carry. Fully decoded chip: the camera shows the remaining capacity and raises no third-party battery warning. For Canon EOS R50, R100, R10, R8, RP, M3, M5, M6 Mark II, 77D, 200D, 250D, 750D, 760D, 800D, Rebel T6i, T6s, T7i.
The batteries have a capacity of 1040 mAh, that is 7.70 Wh at 7.4 V. In practice that is roughly 2300 shots each, about 4600 for the whole set. In video one battery lasts around 2 h 30 min (Canon EOS M6).
The battery charges straight over USB-C, so on the road a cable and any source will do — a power bank, a laptop or a car charger.
The chip watches over-charge, over-discharge, over-voltage, over-current, short circuit and overheating, and switches to trickle charging once full.
An indicator on the battery glows red while charging and green when full. Over USB-C it is full in about two hours.
| Manufacturer: | K&F Concept |
| Category: | 7.2V battery |
| Battery type | Canon LP-E17 |
| Capacity | 1040mAh |
| Batteries included | 2ks |
| Charger included | No |
| USB-C charging | Yes |
| Battery Capacity | 7.7Wh |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking