Three Canon LP-E17 1250 mAh batteries with a triple-slot charger that doubles as a carrying case. Fully decoded chip — the camera reads the battery as genuine and shows the remaining capacity.
Three Canon LP-E17 1250 mAh batteries with a triple-slot charger that doubles as a carrying case. Fully decoded chip — the camera reads the battery as genuine and shows the remaining capacity.
For Canon EOS R50, R100, R10, R8, RP, PowerShot V1, 77D, 200D, 750D, 760D, 800D, Rebel T8i, T7i, T6i, T6s, SL2, SL3, M3, M5, M6 and other bodies using LP-E17.
Three full-size 1250 mAh batteries work out at roughly 290 shots each — about 870 for the whole set. In video one battery lasts around 2 h 25 min, measured on Canon EOS M6 Mark II, 1920 × 1080/25P.
The triple-slot charger draws power over USB-C, so a power bank, a laptop or a car charger will do. With a 20 W PD adapter one battery is done in about 1.3 h, two in 2 h, all three in 3.7 h.
The state is obvious at a glance: a white LED means powered on, breathing red charging below 80 %, breathing blue charging above 80 % and steady green fully charged. The housing is made of fire-resistant material and watches temperature, over-voltage, over-discharge, over-current, over-charge and short circuit.
On Canon EOS M3, M5, M6, RP, R10, R8, R50, Rebel T6i the camera will not display the charge level — the battery otherwise works normally.
| Manufacturer: | K&F Concept |
| Category: | 7.2V battery |
| Battery type | Canon LP-E17 |
| Capacity | 1250mAh |
| Batteries included | 3ks |
| Charger included | Yes |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking