Hollyland Solidcom BPK01 Beltpack

The Hollyland Solidcom BPK01 is the wireless beltpack of the professional Solidcom H1 intercom. It weighs 305 g including the battery, runs for more than 15 hours, is IP65-rated and reaches up to 500 m on the DECT 1.9 GHz band. Four call buttons A–D handle up to 16 audio channels, and a headset connects via 10-pin LEMO, 3.5 mm jack or Bluetooth 5.2.

A beltpack for large productions

A stand-alone beltpack adds another crew member to a Solidcom H1 system. It pairs when inserted into a charging base connected to the Solidcom ANT01 antenna – and is on the network in about three seconds.

305 gIP65> 15 h500 mDECT 1.9 GHz

Four buttons, 16 channels

Each of the buttons A–D can be assigned as a talk key or a call alert and supports up to four stacked actions – 16 audio channels in total. The Reply button answers an incoming call.

Light and tough

305 g including the battery, a metal belt clip and metal eyelets for a neck lanyard. IP65 protection keeps out dust and rain, and the battery ejects with a single button.

Wired or Bluetooth headset

Built-in Bluetooth 5.2 pairs the beltpack with TWS earbuds and over-ear Bluetooth headsets. A professional headset connects via the 10-pin LEMO connector, ordinary earphones via the 3.5 mm jack.

Seamless roaming

One Solidcom ANT01 antenna serves 20 beltpacks, three cascaded antennas 30 beltpacks, and with the Geo Central Station up to eight antennas and 80 beltpacks. The link is handed over seamlessly between antenna zones.

More than 15 hours of use

The removable battery lasts more than 15 hours – a full shooting day with headroom to spare.

Pairing in the base

Insert the beltpack vertically into a base connected to the antenna; after about 3 seconds it pairs and takes over the configuration.

HOLLYVOX app

Groups, roles and beltpack settings are managed in a browser or in the HOLLYVOX app on a computer or phone.

20 dB noise cancellation

LEMO audio: 150 Hz – 7 kHz, 20 dB noise cancellation depth and 67 dB signal-to-noise ratio.

Controls and interfaces

The numbers in the drawing match the list below.

1. Display screen
2. Call buttons A/B/C/D
3. Reply button (for call response)
4. Menu button
5. Metal component (lanyard eyelet / impact-resistant design)
6. Volume knob
7. Metal clip
8. Removable battery
9. Power switch
10. Charging contacts (6-pin)
11. Battery eject button
12. 3.5 mm jack (LINE IN / headset)
13. USB-C port (charging / device pairing / upgrade)
14. 10-pin LEMO interface (headset / accessories)