The Ulanzi KL01 is a pocket-sized system flash with a rotating color filter wheel built right into the head. You can switch between seven color effects with a single turn—no need to attach gels, no holders, and no need to disassemble the unit. The xenon flash tube with a guide number (GN) of 10 produces clean…
The Ulanzi KL01 is a pocket-sized system flash with a rotating color filter wheel built right into the head. You can switch between seven color effects with a single turn—no need to attach gels, no holders, and no need to disassemble the unit. The xenon flash tube with a guide number (GN) of 10 produces clean light at a color temperature of 6500 K with a color rendering index (CRI) of ≥ 96; the power can be adjusted in four steps from 1/1 to 1/8, and a single charge lasts for up to 600 full-power flashes. Weighing just 49 g, it fits in a shirt pocket.
The Ulanzi KL01 has seven colour filters built right into its head. Turn the wheel to change the colour of the light, with no gels or holders. The GN10 xenon tube gives 6500 K light with CRI ≥ 96.

The filters are built into the flash head and switch with a turn of the wheel. Seven colours and a clear position for neutral light are always at hand, with no cutting or taping of gels.
Warm or cool correction.
Rich colour in one turn.
Effect colours without gels.
Only 49 g and 53.5 mm.

The filters are built into the flash head. Turn the wheel to switch colours instantly, with no need to find a gel, cut it and tape it to the head. Seven colour filters are available, plus a clear position for neutral light.

Filters #85CTO and #82CTB correct colour temperature towards warm and cool, while #206, #812, #102, #805 and #504 are effect colours for portrait and product photography. Switching takes a second, so you can try variations right in the middle of a shoot.

Traditional colour filters are bulky, hard to store and easy to lose. The KL01 has its filters built into the head, so you just turn: fast, clean and effortless.

Use the M button to switch power between 1/1, 1/2, 1/4 and 1/8. Lower power means shorter recharge times and longer battery life, ideal for fill light. At 1/8 the flash handles a continuous burst, and at full power it recharges in 2.5 s.

The built-in 3.8 V / 400 mAh battery lasts up to 600 flashes at full power. It charges over USB-C in about 1.5 hours, with the same cable as a phone. The charging cable is not included.

On the body you find the power and output button, the test flash button, the flash window, the colour filter wheel, the power level and charging indicators, the USB-C port and the hot shoe foot.

The flash measures 53.5 × 43 × 37 mm and weighs 49 g. Carry it in a jacket pocket or a side compartment of your bag and attach it when needed. The single-pin hot shoe fits most digital cameras with a centre contact, and the flash works in manual mode.

Colour filters change the mood of a shot, from a warm evening portrait to a rich fashion frame. Actual flash output varies with the selected filter, as each one transmits a different amount of light.

The Ulanzi KL01 is a pocket-sized system flash with a rotating colour filter wheel built right into the head. Switch between seven colour effects with a single turn, with no gels and no holders. The xenon flash tube with a guide number of GN10 (ISO 100) produces clean light at 6500 K ±5 % with CRI ≥ 96. Power can be switched in four steps: 1/1, 1/2, 1/4 and 1/8. The built-in 3.8 V / 400 mAh battery lasts up to 600 flashes at full power and charges over USB-C. The flash weighs 49 g, has a single-pin hot shoe and works in manual mode. It is not compatible with cameras that lack a centre contact in the hot shoe.
| Manufacturer: | Ulanzi |
| Category: | Flash |
| Type | Flash |
| Mount | Hot shoe |
| Power supply | Built-in lithium battery |
| Colour temperature | 6500K |
| Guide number | 10 |
Special offers and discounts for subscribers only · Free audio & video workshops · News and tips from the world of filmmaking