Ulanzi Camera Cooling Fan For Sony / Canon / FUJIFILM Black Upgraded

The Ulanzi CA25 Camera Cooling Fan is a fantastic investment, especially during the summer months when cameras can easily overheat during extended use. Designed for Sony, Canon, and FUJIFILM cameras, it effectively prevents overheating, ensuring your camera performs at its best even in hot conditions. It's a must-have accessory for maintaining optimal performance and avoiding potential issues caused by excessive heat during your photography sessions. Compatible with cameras such as Sony ZV-E1/ZV-1F/ZV-1/ZV-E10L/a7RV/a7 IV (A7M4)/a7S III (A7S3)/A7C/FX30/A6700, Canon R10/R8/R7/R6 Mark II/R5/90D, FUJIFILM XS10/XT4/X-H2S/X-S20/X-H2, Nikon Z30 and more.

Cooling fan for longer shoots

The Ulanzi CA25 clips onto the back of a Sony, Canon or FUJIFILM camera and carries heat away during long recording. An OLED display shows the temperature and the 200 mAh battery runs up to 85 minutes.

2 speed levelsOLED temperature display200 mAh batteryWeight 78 gUSB-C charging

Active cooling without complicated rigging

The fan attaches to the camera body with a spring clamp, with no tools and no extra accessories. Two speed levels let you choose quiet operation or higher cooling power.

Long takes

Heat is carried away continuously.

Hot days

Cooling for outdoor shooting.

Temperature check

Reading on the OLED display.

Power

USB-C charging, even while in use.

Lower temperature during long recording

During longer shoots the back of the camera body heats up. The fan cools it actively, which reduces the risk of overheating and recording limits.

Aluminium body with vented opening

The compact aluminium body has slanted vents for airflow. On the side there is a USB-C port, a mode button and a small OLED display.

Heat removed from the electronics

The airflow is aimed at the back of the body, where heat from the processor and sensor builds up. The camera stays more stable under load.

Spring clamp

The back of the fan carries two spring arms. Squeeze them, place the fan against the camera and release. It holds firmly to the body without screws.

Charging and power over USB-C

The fan takes an ordinary USB-C cable. The battery can be charged while the fan is running, for example from a power bank on a long shoot.

Six key features

Two speed levels, easy installation, USB-C charging, intelligent temperature monitoring, an OLED display and low weight.

High cooling efficiency

Level 1 is quiet operation at low speed, level 2 adds higher speed for effective cooling.

Easy installation

Press the spring and fit the fan onto the back of the camera until it sits perfectly.

Worry-free battery life

The built-in 200 mAh battery lasts up to 85 minutes on level 1 and up to 70 minutes on level 2. Values tested by Ulanzi Lab.

Real-time OLED display

The 11.7 mm display shows the current temperature and the selected speed level.

Lightweight and portable

The fan weighs approximately 78 g and is palm-sized, so it is easy to store and carry.

More information