Tilta Electronic Suction Cup (4.5″) with NATO Mounting Bracket

The Tilta Electronic Suction Cup (4.5″) with NATO Mounting Bracket provides advanced stability for various mounting needs. It features air pressure detection, monitoring 1000 times per second, with an electronic screen display. An automatic motor maintains suction by pumping air when pressure drops. The internal battery-powered motor achieves suction within 5 seconds, and the optimized design increases contact area by 20%.

The Tilta Electronic Suction Cup (4.5″) with NATO Mounting Bracket pairs actively controlled vacuum with a rigid aluminum base, making it a solid choice for mounting a camera, monitor or phone on a car window, body panel or any other smooth surface. A chip checks pressure 1000 times a second and the motor tops up the vacuum automatically if it drops, so the mount holds through a long moving shot.

Key features

Electronic pressure monitoring

A display on the cup's body shows the current vacuum level in real time, so you always know how firmly the mount is actually holding. The sensor checks status 1000 times per second and fires the motor to re-pump air the moment pressure drops.

Suction in under 5 seconds

The internal motor, powered by a 2000mAh battery, pulls a full vacuum within five seconds of pressing the button and runs for up to 14 hours of continuous use on a single charge. The battery also tops up over USB-C, so an all-day shoot never has to stop.

The aluminum base and its enlarged contact area hold reliably even on a sloped or slightly curved window, as shown here mounted on a car side window.

Key features

• Electronic pressure detection reporting status 1000 times per second
• Automatic air top-up when pressure drops
• Full suction in under 5 seconds
• 2000mAh battery, up to 14h runtime, charges over USB-C 5V/1A
• 20% larger contact area than standard suction cups
• NATO bracket included (also supports Hydra M25 and Universal Multi-Mount)