Tilta 6-Pin Lemo to 6-Pin Lemo Cable 500 cm

The Tilta TCB-6LE-6LE-500 is a five-metre control cable with a 6-pin Lemo plug at both ends. It wires the control handle, the Tilta Remote Control Handle, to the receiver, the Remote Control Receiver Module, on a DJI RS 2, RS 3 Pro, RS 4 Pro or RS 5 gimbal wherever the wireless link is not enough — on a car or in an environment with interference. It is the cable from the Remote Control Kit, sold on its own as a replacement or spare.

The Tilta TCB-6LE-6LE-500 is the wired path between the remote control handle and the receiver on a DJI Ronin gimbal. Where radio drops out — on a moving car, in a hall full of transmitters — it carries the commands over cable with no lag and no dropouts.

6-pin Lemo between handle and receiver

The 6-pin Lemo plug at one end goes into the control handle (Remote Control Handle), the other into the receiver module (Remote Control Receiver Module) fitted to a DJI RS 2, RS 3 Pro, RS 4 Pro or RS 5. The connectors hold with push-pull locking, so the cable will not pull out even when tugged. The cable carries the pan and tilt commands for the gimbal, its settings and the camera's record and photo triggers — the same things the wireless link otherwise transmits.

Five metres for car and crane

The 500 cm length reaches from a gimbal on a car mount to the operator in the cabin, or from a crane arm to the handle on the ground. For transport the cable is wound up and held with a hook-and-loop strap. It is part of the Tilta Remote Control Kit for DJI Ronin (TGA-RCK); on its own it is bought as a replacement or a second cable.

Tilta cables

The Tilta TCB cable range links camera, battery and accessories on the rig: power from a V-Mount or Gold Mount plate over P-Tap, 2-pin Lemo, 3-pin Fischer or a DC barrel connector, USB-C PD for monitors and handles, 7-pin control cables for the Nucleus system and HDMI or BNC for the picture. Lengths follow the rig — short on the cage, longer out to arms and batteries; this cable is one of them.