Movmax Solar Electronic Suction Cup with NATO Rail

A 4.5″ Movmax electronic suction cup with solar and USB-C charging that monitors its own vacuum and re-pumps when it drops. It holds 40 kg vertically and 10 kg horizontally, with a NATO rail, 1/4″-20 threads with ARRI holes and a cold shoe.

The Solar Electronic Suction Cup replaces the hand pump with electronics. It measures the pressure 1200 times per second and, when it drops, restores the vacuum in a fraction of a second. Three solar panels and a USB-C port charge the battery, and an LCD shows suction, battery and motor status.

A suction cup that watches its vacuum

A 4.5″ electronic vacuum suction cup with solar charging, a NATO rail and a 40 kg vertical payload.

40 kg vertical10 kg horizontalSolar + USB-CSuction in 5 sNATO rail

For cars and glass

On a bonnet, door or window it holds an action camera, phone, light or monitor. Start suction with one press and it is done within 5 seconds.

Automatic re-pumping

The electronics measure the pressure 1200 times per second. When the vacuum drops, the motor restores it in 0.06 s, so the cup will not loosen during a shoot.

Power from the sun

Three solar panels charge the battery even when switched off, about 5 % per hour in direct sunlight. Indoors, charge it over USB-C.

Your camera’s safety comes first

An aluminium body, a silicone cup and constant pressure monitoring: the cup holds 40 kg vertically and 10 kg horizontally and always shows its status on the display.

NATO rail

A NATO rail on top plus 1/4″-20 threads with ARRI locating holes.

Seven 1/4″-20 threads

Three on top and four on the sides for more accessories.

LCD display

Shows suction, pressure in kPa, motor and battery status.

One-button control

Hold to power on, press to suck, double-press to release.

4.5″ solar electronic suction cup with NATO rail. An intelligent vacuum mounting system with solar charging, strong load stability and silent suction.

Charge by sunlight or USB-C. A constant red light means charging in strong sunlight, a flashing one in normal light. If it does not charge, power it from a power bank.

Protection comes first. Below 85 % vacuum the cup re-pumps automatically, the body is durable aluminium alloy and the vacuum cup holds firmly.

Aluminium alloy construction. Power/release button, USB-C port, LCD display, solar panel, release grip, NATO rail, cold shoe mount and 1/4″ threads with locating holes.

What you get. High load capacity, real-time pressure monitoring, silent suction within 5 seconds and solar charging.

40 kg vertical and 10 kg horizontal capacity. The cup holds your camera securely on vertical and horizontal surfaces.

Three-step installation. Place the cup on a clean, smooth surface, hold 5 s to power on and press to suck to 100 % kPa. Double-press to release, hold 5 s to power off.

Packing list and specifications. Suction cup, USB-C cable, dust cover, manual and hex wrench. Weight 880 g, box 115 × 115 × 80 mm.