MOVMAX Mamba Junior Car Mounting System

Movmax Mamba Junior is a compact car mount for low shots from the bonnet or side of a car. Two suction cups with 5″ arms, a bracket extender, two connectors and a 260 mm Arca plate with a 1/4″ sliding plate hold the camera balanced.

Mamba Junior is the smaller rig of the Movmax Mamba series. Two suction cups with 5″ arms attach with longitudinal connectors to a 260 mm Arca plate, along which a plate with a 1/4″ screw slides – so you can balance and level the camera low over the bodywork.

A compact Mamba car mount

Two suction cups, a 260 mm Arca plate and a 1/4″ sliding plate for low shots from a car.

2 suction cups5″ arms260 mm Arca plate1/4″ screw210° rotation

Camera low over the bonnet

The suction cups and Arca plate hold the camera just above the bodywork – for dynamic shots close to the road, on the bonnet or the side of the car.

Balancing with the sliding plate

The plate with a 1/4″ screw slides along the Arca plate, so you can balance the camera between the suction cups and take it off quickly.

A quick rig for smaller cameras

Mamba Junior goes together from a few parts in moments, and the bracket extender lets you adapt it to the shape of the bodywork.

5″ suction cups

The arm rotates 210°, the screw 280°.

5″ extender

Longer reach for one of the brackets.

Longitudinal connectors

Join the arms to the Arca plate.

Sliding plate

1/4″ screw and quick release.

Large angle range. The arm rotates 210°, so you can set the angle freely for each scene.

Screw connection for steady filming. Turn the 1/4″ screw head through 280° and tighten it firmly.