MOVMAX Grip Dolly Underslung Support (Pair)

The Movmax Grip Dolly Underslung Support (Pair) is a pair of supports for the underslung configuration of the Grip Dolly camera dolly. The dolly runs on the Φ48 tube track and the camera hangs below it for moves just above the ground.

In the underslung configuration the camera sits below the track instead of on top. The pair of supports connects the dolly to the camera mount so that it hangs beneath the Φ48 tubes and the track stays out of frame. Reverse the mounts and you get low moves with minimal setup.

For an underslung camera

A pair of supports that switch the Grip Dolly into an underslung configuration for low-angle shots.

Underslung mountPair of supportsLow-angle shotsFor Grip Dolly

Camera below the track

The supports move the camera beneath the track tubes. The move then runs just above the ground and the track stays out of the shot.

Grip Dolly system expansion

The part is not included in the Pro Kit – Movmax offers it as an expansion for the Grip Dolly, which runs on Φ48 tubes and carries up to 90 kg.

A genuine Grip Dolly part

Parts from the dolly maker fit the frame and the Φ48 tube track exactly, so you complete or repair the rig without improvising on set.

Sold as a pair

Two supports for a stable underslung camera.

Low moves

The camera travels just above the floor.

Genuine Movmax

Made for the Grip Dolly and its Φ48 tube track.

A 90 kg payload dolly

The part completes a dolly built for full cinema cameras.

Underslung configuration. Reverse the mounts and the camera hangs below the dolly for low-angle shots with minimal setup time.