MOVMAX Blade Arm 1/4 Screw Connector

A metal connector with a 1/4″-20 screw for the Movmax Blade Arm. It attaches a DJI Osmo Pocket 3, action camera or any other 1/4″ device to the end of the arm and is tightened through side holes with a coin, screwdriver or key.

The 1/4″-20 screw connector is a part of the Movmax Blade Arm that is also sold separately as a spare or second piece. The black metal disc with a central screw joins the end of the arm to a camera, stabiliser or holder with a 1/4″ thread.

Universal coupling for the Blade Arm

A black metal disc with a 1/4″-20 screw that attaches a camera, stabiliser or holder to the end of the Blade Arm.

1/4″-20 screwMovmax Blade ArmMetal constructionSide tightening holes

Reliable tightening

Holes around the rim take a coin, screwdriver or key, so you can tighten the screw harder than by fingers alone and the joint holds even at speed.

Spare or second piece

The same connector comes in the Blade Arm box. Bought separately, it replaces a lost part or lets you swap devices quickly.

A solid joint at the end of the arm

All the arm’s stabilisation is wasted if the camera works loose at the end. The metal connector with a tightened 1/4″-20 screw holds the device firmly even when shooting from a moving car.

Standard thread

The 1/4″-20 screw fits common cameras, stabilisers and phone holders.

Metal

A durable metal construction in black.

Lightweight

The connector adds almost no weight to the rig.

For Blade Arm

Made specifically for the end of the Movmax Blade Arm.