Libec FPR-2

The Libec FPR-2 is a foot pedal controller for the LX-ePed 2, LX-ePed 2 Studio and LX-ePed PRO electric pedestals. The pedals raise and lower the column, the speed follows the pressure applied and three buttons recall stored heights. Your hands stay free for the PTZ camera and no extra controller sits on the desk. It weighs 1.16 kg.

The Libec FPR-2 is a foot pedal controller for the LX-ePed 2, LX-ePed 2 Studio and LX-ePed PRO electric pedestals. Two pedals raise and lower the column, the speed follows the pressure you apply and three buttons recall stored heights. Your hands stay free for the PTZ controller.

Pedestal height under your foot

Two pedals to raise and lower the column plus three preset buttons for the LX-ePed 2, 2 Studio and PRO.

For LX-ePed 2 and PROUp/down pedals3 presetsPressure-sensitive speedWeight 1.16 kgWired connection

Camera and height at once

Your hands run the PTZ camera while your foot raises or lowers the pedestal. No extra controller ends up on the desk.

Speed follows pressure

The harder you press the pedal, the faster the column moves. Fine height adjustments need no look under the desk.

Three stored heights

Three preset buttons recall the heights stored in the pedestal. Switching between shots takes a single press.

Hands free for the PTZ controller

The FPR-2 connects to the LX-ePed port on the pedestal and moves column control to your foot. It suits setups where one operator handles both camera and height.

For three models

Works with the LX-ePed 2, LX-ePed 2 Studio and LX-ePed PRO.

Status LED

An LED on top shows that the controller is connected.

Compact size

The controller measures 174 × 210 mm and weighs 1.16 kg.

Studio and events

Operates from −10 to +40 °C at humidity below 80 %.

Foot control for the LX-ePed. With the optional FPR-2 you operate the electric pedestal with your foot and the PTZ camera with your hands at the same time. The upper column speed follows the pressure on the pedal.