Libec FPR-1 Foot Pedal Remote Control for LX-ePed

The Libec FPR-1 is a foot pedal controller for the first-generation LX-ePed and LX-ePed Studio electric pedestals. Two pedals raise and lower the centre column, and the speed follows the pressure you apply. Your hands stay free to operate the PTZ camera. It connects to the LAN port of the pedestal, has a status LED and weighs 1.3 kg.

The Libec FPR-1 is a foot pedal controller for the first-generation LX-ePed and LX-ePed Studio electric pedestals. Two pedals raise and lower the column, and the speed follows the pressure you apply. Your hands stay free for the PTZ camera.

LX-ePed height under your foot

Two pedals to raise and lower the column of the LX-ePed and LX-ePed Studio pedestals.

For LX-ePedUp/down pedalsPressure-sensitive speedWeight 1.3 kgLAN cable174 × 210 mm

Camera and height at once

Your hands run the PTZ camera while your foot raises or lowers the pedestal. No extra controller ends up on the desk.

Speed follows pressure

The harder you press the pedal, the faster the column moves. A full movement takes approximately 14 to 40 seconds.

Simple connection

The controller connects to the LAN port of the pedestal. An LED shows it is ready.

Hands free for the PTZ controller

The FPR-1 moves LX-ePed column control to your foot. It suits setups where one operator handles both camera and height.

For two models

Works with the first-generation LX-ePed and LX-ePed Studio.

Up pedal

The right pedal raises the column at a speed set by foot pressure.

Down pedal

The left pedal lowers the column, again pressure-sensitive.

Operating temperature

Works from −10 to +40 °C.

Two pedals, one movement. Press the up or down pedal to move the LX-ePed column; the speed follows the pressure on the pedal.